Siemens PROFINET SIRIUS 3RW5 - Configuring 3 RW5 Soft Starters with the Aid of a 3 RW5 HMI High Feature

Result
The 3RW5 soft starter is con󹪝gured in the PROFINET IO system and can communicate via the
3RW5 PROFINET communication module with other PROFINET devices.
6.2.1.2 Con󹪝guring 3RW5 soft starters with the aid of a 3RW5 HMI High Feature
This chapter describes options for con󹪝guring the 3RW5 soft starter that you require for
a 3RW5 HMI High Feature.
Requirements
• Input device (3RW5 HMI High Feature, PC)
• Supply voltage (control supply voltage) switched on at 3RW5 soft starter
Procedure












① Programmable logic controller/IO controller, e.g. SIMATIC S7‑1500
② PC or programming device with con󹪝guration software of the controller and SIRIUS Soft Starter ES
(TIA Portal) Premium / Professional (optional)
③ PROFINET
④ SIRIUS 3RW5 soft starter / IO device
⑤ PC with SIRIUS Soft Starter ES (TIA Portal)
⑥ 3RW5 HMI High Feature (accessories depend on 3RW5 soft starter)

...

: Steps to be taken in the procedure
Con󹪝guring
6.2 Con󹪝guring the 3RW5 Soft Starter
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004 57