Siemens PROFINET SIRIUS 3RW5 - Dynamic Reconfiguration (DR)

8.7 Dynamic Recon󹪝guration (DR)
Requirement
• 3RW5 PROFINET High Feature communication module with 󹪝rmware V3.0 or higher
Changes during operation
Changes during operation (Dynamic Recon󹪝guration) refer to the property, based on redundant
communication connections, of being able to make changes to the system without having to
restart devices or controllers and without a󹪜ecting communication in the network. This applies
to measures on or with compact devices as well as to modular devices or proxies.
Examples include changing a device con󹪝guration, replacing a device, adding or repairing
components, or changing parameters.
Formerly this function was called Con󹪝guration in Run (CiR).
Functions
8.7 Dynamic Recon󹪝guration (DR)
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004 137