Siemens PROFINET SIRIUS 3RW5 - History

When operating in an automation system:
• Programmable logic controller (PLC), e.g. SIMATIC S7-1500
• PC or programming device with installed controller con󹪝guration software, e.g. STEP 7 with
HSP or GSDML 󹪝le
• Parameterization software (optional), e.g. SIRIUS Soft Starter ES (TIA Portal) (Page 34)
For exclusive use of SIRIUS Soft Starter ES (TIA Portal) via the 3RW5 communication module:
• PC with SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (Page 34)
Basic knowledge of the following areas:
• General electrical engineering
• Drive technology
• Automation technology
• Handling the automation system and the software used
Target group
The manual is intended for everyone involved in the following tasks:
• Planning and con󹪝guring systems
• Installation
• Commissioning
• Service and maintenance
3.1 History
Release number New features
03/2018
• Initial release
02/2019
• Revision of the manual
• Supplementary functions for the 3RW5 PROFINET Standard communication
module
(e.g. PROFIenergy)
• 3RW5 PROFINET High Feature communication module
06/2020
• Revision of the manual
• Addition of contents for the 3RW50 and 3RW55 Failsafe soft starters
• Addition of contents for web server and OPC UA server for the 3RW5 PROFINET
High Feature communication module
05/2021
• Revision of the manual
• Addition of content to 󹪝rmware version V3.0 of the 3RW5 PROFINET High
Feature communication module
Description
3.1 History
SIRIUS 3RW5 PROFINET communication modules
18 Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004