Siemens PROFINET SIRIUS 3RW5 - Integrating the 3 RW5 Soft Starter into PROFINET IO system

Note the settings in the con󹪝guration software of the controller.
Note
Set static IP parameters
Static IP parameters that were previously set are overwritten and deleted by temporary IP
parameters.
Static IP parameters
The IP parameters set on the 3RW5 soft starter or transferred online are stored retentively in the
3RW5 communication module. The IP parameters of the 3RW5 communication module must
match the IP parameters in the con󹪝guration.
When assigning the IP parameters online, note the settings in the con󹪝guration software of the
controller.
Note
Restarting the communication interface
Any change in the IP parameters via SIRIUS Soft Starter ES (TIA Portal) requires a restart of the
communication interface.
A new start interrupts all PROFINET links and reestablishes them afterward.
6.2.2 Integrating the 3RW5 Soft Starter into PROFINET IO system
6.2.2.1 Integrating 3RW5 soft starter via HSP in STEP 7 (TIA Portal)
Requirements
• STEP 7 (TIA Portal) as of V15 Update 3
• Hardware Support Package (HSP0238)
The current Hardware Support Package (HSP0238) can be found on the 3RW5 topic page
(
https://support.industry.siemens.com/cs/ww/en/view/109747404).
Con󹪝guring
6.2 Con󹪝guring the 3RW5 Soft Starter
SIRIUS 3RW5 PROFINET communication modules
62 Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004