Siemens PROFINET SIRIUS 3RW5 - Page 165

Byte Data format Meaning 3RW
50
1)
52
2)
55 /
55-F
3)
0 Unsigned8 Coordination
[0x21] Write via acyclic bus channel – user program
x x x
2 0x02 Slot number x x x
4 Unsigned16 Length of data structure x x x
6 Unsigned16 Start position x x x
1)
Supported by SIRIUS 3RW50 soft starter
2)
Supported by SIRIUS 3RW52 soft starter
3)
Supported by SIRIUS soft starter 3RW55 and 3RW55 Failsafe
Byte Bit Data format Process image 3RW
50 /
52
1)
55
2)
55-F
3)
10 0 Bool Motor CW r/w r/w r/w
1 Bool Motor CCW - r/w r/w
3 Bool Reset r/w r/w r/w
4 Bool Emergency start - r/w
4)
r/w
4)
5 Bool Self-test (user-test) r/w r/w r/w
6 Bool Creep speed - r/w -
11 0 Bool Output 1
5), 6)
- r/w r/w
1 Bool Output 2
5), 6)
- r/w r/w
2 Bool Parameter set bit 0
7)
- r/w r/w
3 Bool Parameter set bit 1
7)
- r/w r/w
7 Bool Disable quick-stop - r/w r/w
12 0 Bool Output 3
5)
- r/w -
3 Bool Activate pump cleaning - r/w r/w
13 0 Bool Manual operation local - input controlled r/w r/w r/w
1 Bool Use alternative stopping mode - r/w r/w
2 Bool Motor standstill - r/w -
1)
Supported by SIRIUS 3RW50 and 3RW52 soft starters
2)
Supported by SIRIUS 3RW55 soft starter
3)
Supported by SIRIUS 3RW55 Failsafe soft starter
4)
Control data is relevant for EX applications
5)
You can assign the control data "Output 1", "Output 2" and "Output 3" to the digital outputs 1, 2 and 4 of the 3RW55 soft starter
in any order via the digital output actions. You will 󹪝nd more information in the Equipment Manual of the 3RW5 soft starter.
6)
You can assign the control data "Output 1" and "Output 2" to the digital outputs 1 and 2 of the 3RW55 Failsafe soft starter in
any order via the digital output actions. You will 󹪝nd more information in the Equipment Manual of the 3RW5 soft starter.
7)
Explanation in the following table
Appendix
A.4 Data sets
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004 165