Connection
7.2 General connection drawings
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
99
Without electrical interlock between breaker 1 (BRK1) and breaker 2 (BRK2)
An electrical interlock is not achieved in the drawing shown above. In application 2S-1T-AI,
breaker BRK2 can be interlocked with the tie breaker.
Note
Implementation of the power supply
Further information about implementation of the power supply of th
e ATC6500 via inputs 53,
54 and/or inputs 26/27 can be found in the chapter
Connecting the power supply (Page 83).
To Next Page
Loading...
