Siemens SENTRON ATC6500 - Changing the parameters; Parameterization via the powerconfig software

Parameterization
9.1 Parameterization via the user interface
3KC ATC6500 transfer control device
156 Manual, 05/2019, L1V30538268002A-01
The following submenus are available in the Settings menu:
Code
Designation
Description
P01
SETTINGS
Language, brightness, display pages etc.
P02 GENERAL Key system data
P03
PASSWORD
Setting of the access code
P04
BATTERY
Parameter for the DC source
P05
ACOUSTIC ALARMS
Setting for the internal sounds and for the external sirens
P06
SOURCE LINES
Setting regarding the supply sources
P07
BREAKERS
Setting regarding the breakers
P08
SWITCH
Basic settings regarding load transfer
P09
SOURCE LINE CHK
Limit thresholds for the sources
P10
COMMUNICATIONS
Communication parameters
P11
AUTOMATIC TEST
Period, duration, mode of automatic test
P12
DIGITAL INPUTS
Programmable functions of the digital inputs
P13
DIGITAL OUTPUTS
Programmable functions of the digital outputs
P14
MISCELLANEOUS
Functions such as maintenance etc.
P15
LIMIT THRESHOLDS
Programmable limit thresholds LIMx
P16
COUNTERS
Programmable generic counters
P17
TIMER
Programmable generic timers
P21
USER ALARMS
Programmable alarms
P22
ALARM TABLE
Enabling and effect of alarms
Example of P04 Battery submenu
The submenus list all parameters with their code, description and actual setting
The example below shows the P04 Battery submenu:
①
Present setting value
②
Currently selected parameter
③
Parameter description
④
Parameter code