Parameterization
9.1 Parameterization via the user interface
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
157
To change the value of a parameter, select it and press ✓.
Note
Access denial
If the password has been enabled for the advanced level, access to this
editing page is not
possible and the Access Denied message is displayed.
If access is possible, the following window appears:
This window contains information on the range of values, the minimum and maximum
values, the previous setting, and the factory default setting.
To Next Page
Loading...
