Siemens SIMATIC ET 200iSP

Prerequisites for Zone 2 and Zone 22
Keep to the following rules in Zone 2:
• See points 1 to 5: Prerequisites for Zone 1 and Zone 21
Prerequisites for safe area
• See points 1 to 4: Prerequisites for Zone 1 and Zone 21
Wiring terminal module TM-IM/EM
For con󹪝guration with PROFINET IO connection: Connecting FO cables
1. Plug a 󹪝ber-optic cable into the media converter or when looping through the PROFINET IO
into the bottom connection of the interface module of the previously connected ET 200iSP
station.
2. Mark the bus cable as "Ex i bus cable".
3. Plug the other end of the 󹪝ber-optic cable into the top connection of the interface module.
Wiring
6.4 Wiring the ET 200iSP
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK 133