Siemens SIMATIC ET 200iSP User Manual

Enclosure for the ET 200iSP
Table A-9 Enclosure for the ET 200iSP
Designation Quantity Article number
Wall box for Zone 1/2 degree of protection Ex e; stainless
steel; foldable box cover; 3 rows of cable inlets M16 (41
pcs at 650 mm wide 68 pcs at 950 mm wide) and 2 rows
of blanking plugs
Empty enclosure prepared:
• 650x450x230 suitable for max. 15 electronic mod‐
ules
• 950x450x230 suitable for max. 25 electronic mod‐
ules
With installation and interconnection of
the ET 200iSP in the wall box
1
:
• 650x450x230 suitable for max. 15 electronic mod‐
ules
• 950x450x230 suitable for max. 25 electronic mod‐
ules
1 unit
6DL2804-0AD30
6DL2804-0AE30
6DL2804-1AD30
6DL2804-1AE30
Wall box for Zone 1/2 degree of protection Ex e; stainless
steel; hinged enclosure cover; 5 rows cable entries
M16=max. Components (66 pcs. for 650 mm width and
111 pcs. for 950 mm width)
Empty enclosure prepared:
• 650x450x230 suitable for max. 15 electronic mod‐
ules
• 950x450x230 suitable for max. 25 electronic mod‐
ules
With installation and interconnection of
the ET 200iSP in the wall box
1
:
• 650x450x230 suitable for max. 15 electronic mod‐
ules
• 950x450x230 suitable for max. 25 electronic mod‐
ules
1 unit
6DL2804-0AD50
6DL2804-0AE50
6DL2804-1AD50
6DL2804-1AE50
Appendix
A.1 Article numbers
ET 200iSP
422 Operating Instructions, 11/2022, A5E00247483-AK

Siemens SIMATIC ET 200iSP Specifications

General

Brand	Siemens
Model	SIMATIC ET 200iSP
Category	I/O Systems
Language	English