Siemens SINAMICS S110 - Page 167

Supplementary system components and encoder system integration
8.1 Basic Operator Panel BOP20
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5
167
BOP20 keyboard
Table 8- 2 Assignment of the BOP20 keyboard
Key
Name
Meaning
ON Powering-up the drives for which the command "ON/OFF1", "OFF2" or "OFF3"
should come from the BOP.
OFF Power-down the drives for which the "ON/OFF1," "OFF2," or "OFF3" com-
mands should come from the BOP.
Note:
The effectiveness of these keys can be defined using the appropriate BICO
parameterization (e.g. using these keys, it is possible to simultaneously control
all of the axes that have been configured.)
The structure of the BOP control word corresponds to the structure of the
PROFIBUS control word.
Functions The meaning of these keys depends on the actual display.
Note:
The effectiveness of this key to acknowledge faults can be defined using the
appropriate BICO parameterization.
Parameter The meaning of these keys depends on the actual display.
Raise The keys are dependent on the actual display and are used to raise or lower
values.
Lower