Siemens SINUMERIK 840D sl Commissioning Manual

The screen position can be defined as follows:
● The screen position can be specified in "Pixels in relation to 640x480".
Example:
//M(MyMask/"MyCaption"/"\\myhelp.png"/0,219,335,174)
● The screen position can be coupled to the resolution-dependent position of a form panel
from an Operate standard screen layout, e.g. "Form panel4" ("auxiliary functions") from the
screen layout "slmastandardscreenlayout.SlMaStandardScreenLayout" of the "Machine"
area
//M(MyMask/"MyCaption"/"\
\myhelp.png"/"slmastandardscreenlayout.SlMaStandardScreenLayout.FormPanel4")
It is therefore easy to superimpose standard forms from Operate or position Easyscreen
screens precisely at their position.
Example:
//M(Mask/"Mask"//"slstandardscreenlayout.SlStandardScreenLayout.LowerForm")
Any other screen layout can also be used.
● The screen position can be coupled to a self-defined, resolution-dependent definition of
form panels in the easyscreen.ini file.
Example:
//M(MyMask/"MyCaption"/"\\myhelp.png"/"MyPanel")
Fundamentals
3.5 Notes on the easyscreen.ini
SINUMERIK Integrate Run MyScreens (BE2)
40 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based