Siemens SINUMERIK 840D sl Commissioning Manual

12.2.16 Assigning a name for magazine location types
<PLACETYPECONFIGURATION> tag
You can find entries to allocate your own location type identifiers in the tag
<PLACETYPECONFIGURATION>. Magazines and magazine location types can be displayed
with texts in the tool lists. Instead of identifier 2, e.g. for location type 2, the configured text is
then output in the tool lists.
Entries Meaning
PLACETYPEXXX XXX stands for the number of the location type.
Text Text identifier of the location type.
Tooltip Tooltip text identifier of the location type.
Example
<PLACETYPECONFIGURATION>
<PLACETYPE1>
<Text value="TM_PLACETYPE_1" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_1" type="QString" />
</PLACETYPE1>
<PLACETYPE2>
<Text value="TM_PLACETYPE_2" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_2" type="QString" />
</PLACETYPE2>
<PLACETYPE3>
<Text value="TM_PLACETYPE_3" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_3" type="QString" />
</PLACETYPE3>
</PLACETYPECONFIGURATION>
Tool management
12.2 Configuring the user interface
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 211

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based