Siemens SINUMERIK 840D sl Commissioning Manual

4.15.3 Configuring SITOP software for PCU Base Software
4.15.3.1 Configuring SITOP software V3.x (USB)
Configuring SITOP software V3.x (USB)
If you want to use a SITOP UPS module in combination with the PCU base software, you must
first adapt the settings of the SITOP software.
Requirement
● The SITOP UPS hardware is connected via the USB interface.
● The SITOP software of version 3.x.2.16 or later is installed in directory C:\Program
Files (x86)\SITOP\
Configuration of the system
4.15 Configuring the SITOP UPS module for use with the PCU Base Software
PCU Base Software (IM10)
54 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based