Siemens SINUMERIK 840D sl Commissioning Manual

4.17.8.5 Activation for a specific connection
Via the Control Panel
Procedure
To activate the file and printer release for a specific connection (e.g. company network),
proceed as follows:
1. Click "Start > Control Panel".
2. Enter "Network and Sharing Center" in the search field and then click on "Network and
Sharing Center" in the search results.
3. Click on the desired connection, e.g. "Local Area Connection 2" (company network).

Configuration of the system
4.17 Adapting the firewall settings
PCU Base Software (IM10)
86 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based