Siemens SINUMERIK 840D sl Commissioning Manual

Backing up and restoring data
4.12 Operating a service PC/PC in the network
PCU-Basesoftware (IM8)
106 Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
4.12
Operating a service PC/PC in the network
4.12.1
Overview
System network
In the following applications, you will need, for example, a connection between the PCU and
a PG/PC in the system network:
● Save the disk image of the PCU-SSD to a PG/PC
● Restore the SSC of a PCU via the DVD drive of a PG/PC
● Start up the replacement SSD
● Install the software on the PCU via the DVD drive of a PG/PC
Company network
If you want to connect the service PG/PC via a company network (Eth 1), contact your
network service center.

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based