Siemens SINUMERIK 840D sl Commissioning Manual

SINUMERIK Integrate - AMB, AMC, AMM
20
Precondition
To start the "SINUMERIK Integrate - AMB, AMC, AMM" software, configure a softkey using a
display machine data. To do this you require, as a minimum, authorization for access level 3
(user).
Configuring a softkey
MD9108 $MM_SINUMERIK_INTEGRATE
= 1 The "SINUMERIK integrate" softkey is displayed on the extended user interface bar.
References
Information on the software can be found in the following documentation:
Function Manual SINUMERIK Integrate - AMB, AMC, AMM
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 501

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based