Siemens SINUMERIK 840D sl Commissioning Manual

Procedure
1. Select the "Start-up" operating area.
2. Press the "HMI", "Diagnostics", and "Action log" softkeys
The "Action Log Settings" window opens.
3. Activate the "Logging on" checkbox to activate the action log.
4. Check the relevant checkbox if you want to acquire particular events in
the action log.
See also
Displaying the log file (Page 441)
18.7.2 Displaying the log file
Loggable data that was logged when the action log function was active is displayed in the
"Action Log File" window.
Log files
The actual data can be displayed using the following files:
● "actual_actionlog.com"
● "actual_crashlog.com"
Procedure
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
The data tree is displayed.
You will find the saved files in the HMI data folder under /logs/action log.
Service and diagnostics
18.7 Action log
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 441

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based