Siemens SINUMERIK 840D sl Commissioning Manual

Analyzing the result
The following functions are available to analyze the result:
● Scaling characteristic graphs
● Zooming characteristic graphs
● Defining a characteristic range using markers
18.12.1 General procedure
Sequence
● Create a trace session file as follows:
– Select the variable and define its representation type.
– Set the graphics window, and the save mode
– Set the trigger property to define the start and end of recording
● Save the recording and its associated properties that have been set
● Analyze the result by making the settings for the display in order to view additional details
(e.g. zoom in, scroll, select section, etc.)
See also
Trace options (Page 469)
Saving the trace file (Page 459)
Variable for trace (Page 461)
Trace settings (Page 467)
Evaluate a trace (Page 470)
Service and diagnostics
18.12 Trace
SINUMERIK Operate (IM9)
458 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based