Siemens SINUMERIK 840D sl Commissioning Manual

Update other components
The following rules must be observed for the additional updates:
● The procedure for updating the PLC-BIOS Update is the same as for the operating system
update.
● FPGA Update: for NCU7x0.3
● CBE30 Bootloader Update: for CBE30 and CBE30-2 (option module)
3.5.2 This is how you update the software
Update / Recover
The following options are available:
● Update the software from the service system or from the network drive.
● Completely restore the CompactFlash Card with the system software from the service
system or from the network drive (Recover system ...).
Service and diagnostics
3.5 Updating the software
NCU operating system
86 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based