Siemens SINUMERIK 840D sl Commissioning Manual

6.2.11 PRESS(ENTER)
Description
The PRESS(ENTER) method is always called when the Enter key is pressed for a variable
with input/output field with input mode WR3 or WR5:
● WR3: Navigation to field and pressing of the Enter key
● WR5: In the input mode, transfer of the value with the Enter key
Programming
Syntax: PRESS(ENTER)
<instructions>
END_PRESS
Description: Enter key pressed
Parameters: - None -
6.2.12 PRESS(TOGGLE)
Description
The PRESS(TOGGLE) method is always called when the toggle key is pressed irrespective
of the currently focused variable.
When required, the FOC screen property can be used to determine which variable is currently
in focus.
Programming
Syntax: PRESS(TOGGLE)
<instructions>
END_PRESS
Description: Toggle key pressed
Parameter: - None -
Example
PRESS(TOGGLE)
DLGL("Toggle key pressed at variable " << FOC) ; The FOC screen property determines which
variable is currently in focus
END_PRESS
Programming commands
6.2 Methods
SINUMERIK Integrate Run MyScreens (BE2)
134 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based