Siemens SINUMERIK 840D sl Commissioning Manual

//M(MyTBMask/"My CustomWidget TouchButton ...")
WRITECWPROPERTY("MyTB1", "textPressed", "This is my first TouchButton (pressed)!!!")
WRITECWPROPERTY("MyTB1", "picture", "dsm_remove_trashcan_red.png") WRITECWPROPERTY("MyTB1", "pic-
tureAlignment", "left")
WRITECWPROPERTY("MyTB1", "scalePicture", FALSE)
WRITECWPROPERTY("MyTB1", "picturePressed", "slsu_topology_empty_round_slot.png") WRITECWPROPER-
TY("MyTB1", "picture", "slsu_topology_empty_slot_left_error.png")
END_LOAD
Figure 7-18 Example, "This is my first TouchButton !!!"
7.6.2 Reading and writing properties
Description
The properties listed in the following section are read with ReadCWProperty() and written with
WriteCWProperty().
Examples
Reading the "Text" property of the SlEsTouchButton linked using display variable
"MyTouchButton". The result is written to register 0.
REG[0] = ReadCWProperty("MyTouchButton", "Text")
Writing value "sk_ok.png" in the "Picture" property of the SlEsTouchButton, linked using display
variable "MyTouchButton".
WriteCWProperty("MyTouchButton", "Picture", "sk_ok.png")
Graphic and logic elements
7.6 SlEsTouchButton
SINUMERIK Integrate Run MyScreens (BE2)
248 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based