Siemens SINUMERIK 840D sl Commissioning Manual

7.7.2 Editing BICO values
You can use the BICO editor to enter BICO values for drive parameters.
Note
BICO values can also be entered by copying and inserting or also directly entered the field.
Procedure
1. Select the "Start-up" operating area.
2. Press the "Mach. data" softkey.
3. Press the "Control unit MD" softkey and select a BICO parameter, e.g.
"p738".
4. Position the cursor on the entry to be changed, e.g. BICO 63.2091.0
5. Press the <SELECT> or <INSERT> key.
The "BICO Editor" window opens.
6. Complete the "Drive object number", "Parameter number", "Bit/Index" and
"Parameter value (hex)" fields.
Note
The BICO editor also opens if you enter a value other than 0 or 1 for the value to be changed.
7.7.3 Editing enum values
For drive parameters, you have the option of editing enum elements (e.g. r2, p3, p4, p97 etc.)
using a selection list.
Machine and setting data
7.7 Editing machine data and drive parameters
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 105

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based