Siemens SINUMERIK 840D sl Commissioning Manual

5.10 Migration
Basic procedure
To transfer data from a PCU with Windows XP to a Siemens PC system with Windows 7, store
the data on a USB flash drive, for example, and then copy it to the PC system:
● For SINUMERIK Operate, use the functions for generating and reading in commissioning
archives.
● For STEP 7 V5.x, copy the generated STEP 7 project data onto the PC system.
Further information
● Information about how commissioning files work in SINUMERIK Operate can be found in
the
SINUMERIK 840D sl SINUMERIK Operate Commissioning Manual (IM9) , Chapter Data
backup .
● Information on STEP 7 V5.x can be found in the associated online help.
● Information about other SINUMERIK applications is provided in the relevant
documentation. You will find documentation on a large number of products in the SIEMENS
Service&Support portal:
Service&Support portal > CNC automation system SINUMERIK (http://
support.automation.siemens.com/WW/view/en/10805517/133300)
Installing and configuring updates and automation software
5.10 Migration
PCU Base Software (IM10)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 119

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based