Siemens SINUMERIK 840D sl Commissioning Manual

Figure 4-7 Delete password dialog
Note
Password functionality is provided with these dialogs. The dialogs do not correspond to the
dialogs of SINUMERIK Operate.
The dialogs can be called either via the Load softkey (LS) function or the Load mask (LM)
function:
1. Call via the Load softkey (LS) function:
LS("Passwd","slespasswd.com",1)
Extension of the vertical softkeys:
– Softkey 1: Set password
– Softkey 2: Change password
– Softkey 3: Delete password
2. Alternatively, the three masks can be directly jumped to by calling the (LM) function:
– Set password: LM("PWD_SET", "slespasswd.com",1)
– Change password: LM("PWD_CHG", "slespasswd.com",1)
– Delete password: LM("PWD_CLEAR", "slespasswd.com",1)
Dialogs
4.1 Structure and elements of a dialog
SINUMERIK Integrate Run MyScreens (BE2)
60 Programming Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based