Siemens SINUMERIK 840D sl Commissioning Manual

Starting the VNC Viewer
Procedure:
1. Select the "VNC Viewer" menu item in the main menu.
The following menu is displayed:
Figure 3-21 VNC Viewer
2. To start the VNC Viewer, enter the following connection data:
– Server name, e.g. IP address or DNS.
– The password is optional and can also be left empty.
– The following assignment applies to the "Session number":
Number Meaning
Session 0 HMI-Applikation
Session 4 Command Shell
Session 5 System logfile
Service and diagnostics
3.6 System diagnostics
NCU operating system
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 95

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based