Siemens SINUMERIK 840D sl Commissioning Manual

Configuring the system
2.4 Configuring the SITOP UPS module for use with the PCU Base Software
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
63
Further information
Information about available SITOP UPS modules is given in the catalog or in the Internet:
● Catalog KT 10.1 Power supply SITOP
● SIEMENS Industry Mall > 24 V DC Uninterruptible Power Supplies
(https://eb.automation.siemens.com/mall/en/US/Catalog/Products/7010117)
Note
Information about the test environment for machine OEMs
The functionality has been tested in the standard configuration with the PCU base soft
ware.
When installing add
-on or OEM software components, you must check the shutdown
procedure of the entire system and adapt the factory setting (180 seconds).
See:
Parameterizing a delay time for quitting the HMI software (Page 67)

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based