Siemens SINUMERIK 840D sl Commissioning Manual

Backing up and restoring data
4.8 Restore a disk image of a partition
PCU-Basesoftware (IM8)
100 Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
Procedure
To restore a partition from a disk image, proceed as follows:
1. Start the Service Center, e.g. via the Windows boot menu.
See also: Create a disk image of a partition (Page 97)
2. In the main menu of the Service Center, click "Partition Restore".
The "Partition Restore" dialog box opens.
Figure 4-7 Service Center - Disk Restore

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based