Siemens SINUMERIK 840D sl Commissioning Manual

Element of the window Purpose
Log Files View and save log files.
About Viewing information about the Service Center.
Shell Open the prompt.
With this command, you can enter commands for executing tasks on the PC system without using a graph‐
ical user interface.
Network Making network settings (Page 125).
Any network settings you make in this dialog box are temporary. To change network settings permanently,
switch to the Service Desktop.
Reboot Restart the PC system.
Shutdown Shut down the PC system.
Note
Data backup and restore with CompactFlash cards
If there is a CompactFlash card in the slot of the PC system, you will not be able to back up
or restore data via the Service Center.
Instead, start the "ghost32.exe" program via the prompt of the Service Center.
Backing up and restoring data
6.3 Functions of the Service Center
PCU Base Software (IM10)
124 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based