Siemens SINUMERIK 840D sl Commissioning Manual

– E.g. read, write, setup monitoring
Figure 3-11 NodeID "Sinumerik > Channel > Parameter > R"
– The attributes of a NodeID can be queried via the entry "View Attributes". One of these
attributes is the "Value", which provides the corresponding value of R1.
Figure 3-12 Viewing node attributes
Setting up of OPC UA server
3.5 Testing the connection
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Configuration Manual, 12/2017, 6FC5397-1DP40-6BA1 29

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based