Siemens SINUMERIK 840D sl Commissioning Manual

1. At the beginning of each chapter for variable sections, you find the information "OEM-MMC:
LinkItem“ specifying "/ToolCompensation/“.
2. Refer to the document and search for "ChannelCompensation" and then navigate manually
to the requested parameter "cuttEdgeParam".
Example 3: Finding a variable from documentation on OPC UA client
You want to find the variable "cuttEdgeParam" in the Tool edge data section.
1. At the beginning of each chapter of the variable documentation you find the information
"OEM-MMC: LinkItem" specifying here "/ToolCompensation/".
2. Therefore you will find the variable "cuttEdgeParam" in the OPC UA Browse Tree in the
folder "Tool", subfolder "Compensation".
Functionality
5.3 Variable access
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
44 Configuration Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based