Siemens SINUMERIK 840D sl Commissioning Manual

Possible procedure
1. Declare the global part program memory in the "Creating drives" window
2. Shift the content of the local program memory with SPF, MPF and WCS directory to an
external drive, e.g. to a USB-FlashDrive.
3. Copy the directories that have been backed up to the global part program memory.
Additional information about managing the program memory is available in the following
documentation:
References
Job Planning Programming Manual, Chapter "File and Program Administration" > "Program
memory"
Creating drive connections
5.4 Creating a global part program memory
SINUMERIK Operate (IM9)
84 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based