General Information on the SINUMERIK 840Di sl
1.2 Overview of software components
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
33
SIMATIC S7 add-on software
The SIMATIC S7 add-on software contains sample programs and applications:
● PLC Toolbox
The PLC Toolbox contains the following components:
– PLC basic program
– SINUMERIK Add-On for STEP 7
e.g. SlaveOM for SINUMERIK 840Di sl, GSD file for PROFIBUS-MCP
– NC variable selector
– PLC Symbol generator
(installation software: <CD-path>\installs\add_on\plc_tb\setup.exe)
● GSD file for I/O modules PP72/48
Device master file with the necessary information in ASCII format for inserting the I/O
module PP72/48 as DP slave in a SIMATIC project.
(GSD file: <CD-path>\support\siem80a2.gsd)
● Sample PLC application
The application examples include the basic PLC- rogram and the linking of one of the
following MCP in the form of SIMATIC S7 archives (*.zip) and SINUMERIK archives
(*.arc).
Path:
< Installation path>\support\840dismp\
– PROFIBUS-MCP:
840disl_tb<version>_DPMCP.zip
and
*.arc
– Ethernet MCP:
840disl_tb<version>_ETHMCP.zip
and
*.arc
– Ethernet-MCP and HT 8:
840disl_tb<version>_ETHMCP_HT8.zip
and
*.arc
Note
The PLC Toolbox should be installed on the PG/PC on which the SIMATIC STEP 7 is
already installed.
To Next Page
Loading...
