Siemens SIPART PS2 User Manual

System pressure, (see Supply air)
T
Terminal strip, 118
Without flameproof enclosure, 83
Terminating resistor, 36
Terminating resistor T, 35
Test certificates, 19
Threaded adapter
Technical specifications, 332
Tight closing, 150, 235
Torque, 332
Transmission ratio selector, 28, 52
Position, 54, 58
Transmitter, 237
Travel integral
Refer to limit monitoring for total strokes, 158
W
Warning label
Position, 54, 57
Warranty, 17
Wiring diagram on module cover, 55
Y
Y1, 239
Index
SIPART PS2 with PROFIBUS PA
372 Operating Instructions, 05/2019, A5E00127926-AC

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h