Siemens SIREMOBIL Iso-C

Prerequisites 1 - 11
Siemens AG SPR2-230.061.01 Page 11 of 18 SIREMOBIL Iso-C
Medical Solutions Rev. 13 12.04 CS PS 24 System Manual
Covers
Basic system
1
Removing the cover 1
• Apply the foot brake.
• Remove the screws from the cover.
• Pull the cover back.
• Unscrew the protective conductor from the cover.
• Pull the cover completely off and remove it.
Installing the cover 1
• Reattach the protective conductor to the back cover.
• Push the cover forward.
• Replace the cover and tighten the screws.
Electrical voltage!
See Chapter 1, Safety Information.
Disconnect the line voltage plug prior to removing covers.
WARNING