Siemens SIREMOBIL Iso-C

SIREMOBIL Iso-C SPR2-230.061.01 Page 16 of 18 Siemens AG
System Manual Rev. 13 12.04 CS PS 24 Medical Solutions
1 - 16 Prerequisites
Installing the covers 1
• Begin with the lower back cover.
• Reattach the protective conductor for the lower cover.
• Install the cover and tighten the screws.
• Reattach the protective conductor for the upper back cover plate.
• Install the cover and tighten the screws.
Installing/removing the cover at the C-arm mounting 1
• Remove the cover screws and remove both covers from the side.
• After completing the procedure, reinstall both covers in the reverse order.
Telescoping cover underneath the horizontal carriage 1
• Remove the four lower screws.
• Slightly loosen the two front screws and remove the telescoping cover from the bottom.