Siemens SIREMOBIL Iso-C

Adjustments / Programs 5 - 25
Siemens AG SPR2-230.061.01 Page 25 of 30 SIREMOBIL Iso-C
Medical Solutions Rev. 13 12.04 CS PS 24 System Manual
Evaluation 5
Calculate the deviation between the measured area dose product and the displayed area-
dose product:
The deviation must be < 0.3 .
Deviation = [(displayed area dose product FDPa) - (measured area dose product FDPg) ]
/ (measured area dose product FDPg)
For deviations > 0.3, the area dose product measurement device must be replaced.
Fig. 8 Fig. 9
Fig. 10
Meas. chamber
Sirephos
I.I.
Center cross
Sirephos
I.I.