Display 9810 series - User manual
165 7EN05-0390-08
Icon Description
Unacknowledged historic alarm indicator:
•
Red: unacknowledged high priority historic alarm
•
Yellow: unacknowledged medium priority historic alarm
NOTE: Low priority historical alarms are not indicated.
The active alarm indicator changes to the historic alarm indicator of the
appropriate level when the alarm state is no longer detected by the meter.
Gray: no active or unacknowledged high or medium priority historic alarms
Alarm and status LED indicators
Your meter has alarm and status LEDs.
These LEDs cannot be configured for other uses.
LED Description
Status
Off: unpowered
Steady green: normal operation
Flashing red: no communications (remote display only)
Steady red: firmware upgrade required (remote display only)
Flashing red/green: startup or firmware upgrade sequence in progress
Alarm
Off: no active or unacknowledged historic alarms
On: acknowledged active alarm
Flashing: active alarm
NOTE: The display backlight flashes for unacknowledged high priority
active alarms.
Display icons
Icons are displayed on the bottom of the screen.
NOTE: If the icon is gray, the function is not available.
Icon Description
Tap More to access additional screens.
Tap Left arrow to select item to the left or to return to the previous screen.
Tap Right arrow to select item to the right.
Tap Up to navigate menu items or screens.
To Next Page
Loading...
