Revenue-locking summary
You must configure and revenue lock your meter before installing it.
•
Unlock your revenue meter if it is locked.
•
Configure the required revenue settings specific for installation.
NOTE: If you are using ION Setup to configure your meter, allow for any communication
delays before removing power to your meter.
•
Verify the revenue settings have been implemented.
•
Clear all accumulated meter data.
•
Revenue lock your meter.
•
Verify the meter is revenue-locked.
•
Install the meter and install the terminal covers according to your meter’s installation guide.
Revenue lock switch
The revenue lock switch located on the meter base is used to revenue lock your meter.
This switch is accessed through a sealable cover.
A Revenue lock switch cover
B Sealing point
C Toggle switch
D Revenue lock LED
Revenue lock LED behavior
The revenue lock LED indicates the lock status of the meter.
9810 series - User manual Revenue
7EN05-0390-08 278
To Next Page
Loading...
