Firmware upgrades 9810 series - User manual
269 7EN05-0390-08
10. Confirm upgrade status is complete and upload webpages to the meter. See "Status" on
page 269 for details.
Option 2 – Upgrading using individual upgrade files
Refer to the “Firmware and templates” section in the meter’s user manual for detailed instructions
on how to upgrade the meter, display and option module firmware.
1. Follow tasks in the order listed:
a.
9810_upgradeAgent_V002.001.000.upx
b.
9810_V003.000.000.upx
To retain your meter settings, select a meter template file (DCF) to paste into the meter
when performing a and b firmware upgrades. Use the Template Paste Options box to
specify the settings to retain after the upgrade.
NOTICE
LOST SETTINGS
Failure to follow these instructions can result in loss of meter settings.
Always select a template file when upgrading the meter firmware.
2. Confirm upgrade status is complete and upload webpages to the meter. See "Status" on
page 269 for details.
Status
After all required meter firmware updates are complete, ION Setup continues to perform the
remaining updates.
•
If you selected to upgrade the template, ION Setup will paste the template into the meter.
•
If you selected to upgrade 948DISP96 remote display firmware, ION Setup will perform the
display upgrade through the connected DIN rail-mounted meter.
Upgrading display firmware
Refer to the Upgrade 948DISP96 display firmware document to get assistance with upgrading
firmware on a US2:948DISP96 display.
Upgrading option module firmware
You can upgrade option module using ION Setup or directly through the meter's internal SFTP
site.
1. Go to www.usa.siemens.com/pds and search for the US2:948M2AO4AI or
US2:948M2DO6DI firmware file.
2. Download the firmware file.
To Next Page
Loading...
