Communications 9810 series - User manual
99 7EN05-0390-08
A Ethernet
B Your meter
C Modbus servers
To use the Modbus client-server architecture, add the Modbus server devices using ION Setup.
Your meter as a Modbus client with serial Modbus server devices
Your meter can function as a Modbus client with serial Modbus server devices.
A Ethernet
B Your meter
C RS-485 Modbus RTU
D Modbus servers
To use the Modbus client-server architecture, add the Modbus server devices using ION Setup.
Modbus client best practices
For your meter to operate as a Modbus client, you must complete some prerequisite
configuration.
NOTE: These settings are required in addition to the serial or Ethernet Modbus prerequisites.
Prerequisite Description
Modbus client devices
All Modbus client devices must be communicating and
appropriately configured.
To Next Page
Loading...
