EtherHaul Operation, Administration and Maintenance Manual
Page 109
ring 1 acw-status-raps : unblocked
ring 1 state : idle
ring 1 last-state-time : 2011.07.05
ring 1 idle-percent : 97.731606
ring 1 protect-percent : 1.249336
ring 1 ms-percent : 0.000000
ring 1 fs-percent : 0.000000
ring 1 pending-percent : 1.019058
ring 1 cw-node-id : 00:00:00
ring 1 cw-bpr : 0
ring 1 acw-node-id : 00:24:a4
ring 1 acw-bpr : 0
ring 1 acw-status-raps : blocked
ring 1 state : idle
ring 1 last-state-time : 2011.06.27
ring 1 idle-percent : 97.658112
ring 1 protect-percent : 1.230652
ring 1 ms-percent : 0.000000
ring 1 fs-percent : 0.000000
ring 1 pending-percent : 1.111240
ring 1 cw-node-id : 00:00:00
ring 1 cw-bpr : 0
ring 1 acw-node-id : 00:24:a4
ring 1 acw-bpr : 0
The following example illustrates how to configure ERP on a ring:
Left_Slave>
# ring configuring
set ring 3 ring-id 200 type ring fdb-id 1 role none cw-port eth1
acw-port eth0 raps-cvid 100
set ring 3 raps-md-level 7 version v2 revertive yes hold-off-timer
0 guard-timer 500 wtb-timer 5500 wtr-timer 1
Left_Slave>
Right_Master>
# ring configuring
set ring 3 ring-id 200 type ring fdb-id 1 role acw-rpl cw-port
eth0 acw-port eth1 raps-cvid 100
set ring 3 raps-md-level 7 version v2 revertive yes hold-off-timer
0 guard-timer 500 wtb-timer 5500 wtr-timer 1
Right_Master>
To Next Page
Loading...
