Siklu EtherHaul - Advanced Settings; Management Access List; SNMP Agent; Figure 7-5 Network Page: Advanced Settings - Management Access List

EtherHaul Operation, Administration and Maintenance Manual
Page 52
7.2 Advanced Settings
7.2.1 Management Access List
Figure 7-5 Network Page: Advanced Settings – Management Access List
List of authorized IPv4/IPv6 IP addresses (or IP address ranges) that are permitted to
access the Host (management).
The default configuration allows all IP address to access the Host.
This section allows configuring the following parameters:
 # - Index (1-8)
 IP Address
 Prefix-Length – together with the IP address determine IP address range
7.2.2 SNMP Agent
Figure 7-6 Network Page: Advanced Settings – SNMP Agent
SNMP Agent properties (SNMP passwords).
This section allows configuring the following parameters:
 Read Community – default is public. Used for Read access (SNMP Get).
 Write Community – default is private. Used for Read/Write access (SNMP Set).
 SNMP-Version – SNMPv2c or SNMPv3. Default is v2c.