EtherHaul Operation, Administration and Maintenance Manual
Page 53
7.2.3 Syslog Server
Figure 7-7 Network Page: Advanced Settings – Syslog Server
When set, all system's event and alarms will be sent to servers. Up to 5 different Syslog
servers can be configured.
Syslog servers listen to Port 514.
7.3 Maintenance
7.3.1 Connectivity
Figure 7-8 Network Page: Maintenance – Connectivity
Enter target IP address (IPv4 or IPv6) and click Ping or Trace Route to test
connectivity. Pop-up screen will display the results.
7.3.2 ARP Table
Figure 7-9 Network Page: Maintenance – ARP Table
To Next Page
Loading...
