Siklu EtherHaul - Link OAM Discovery

EtherHaul Operation, Administration and Maintenance Manual
Page 125
CLI>set link-oam eth0 admin enabled
To view Link OAM configuration and status:
CLI>show link-oam
link-oam eth0 admin : enabled
link-oam eth0 status : operational
link-oam eth0 mode : active
link-oam eth0 pdu-size : 1518
link-oam eth0 revision : 0
link-oam eth0 functions : loopback
link-oam eth1 admin : disabled
link-oam eth1 status : disabled
link-oam eth1 mode : active
link-oam eth1 pdu-size : 1518
link-oam eth1 revision : 0
link-oam eth1 functions : loopback
link-oam eth2 admin : disabled
link-oam eth2 status : disabled
link-oam eth2 mode : active
link-oam eth2 pdu-size : 1518
link-oam eth2 revision : 0
link-oam eth2 functions : loopback
13.3.2 Link OAM Discovery
Once enabled, the Link OAM will perform discovery of the peer Ethernet port.
To view the discovered peer port (MAC address and other settings):
CLI>show link-oam-peer eth0
link-oam-peer eth0 mac-addr : 00:24:a4:00:1f:b8
link-oam-peer eth0 vendor-oui : 00-24-a4
link-oam-peer eth0 vendor-info : 0
link-oam-peer eth0 mode : active
link-oam-peer eth0 pdu-size : 1518
link-oam-peer eth0 revision : 2
link-oam-peer eth0 functions : loopback