Siklu EtherHaul - CLI Commands

EtherHaul Operation, Administration and Maintenance Manual
Page 47
o Temperature – when system temperature exceeds the High or Low
thresholds. Note that system temperature is typically 15-25°C higher then
ambient temperature.
o CINR – when radio CINR drops below the Low threshold.
o RSSI – when radio RSSI drops below the Low threshold.
o Lowest Modulation – the threshold is configured in the Radio Configuration
section.
Threshold-crossing alarms are supported for EH-1200F/FX and EH-600T systems only.
Refer to the Alarms section under Diagnostics chapter of this manual for detailed
description of the system’s alarms.
6.5 CLI Commands
 Restoring factory default configuration:
clear startup-configuration
reset system
 Viewing the startup configuration
copy startup-configuration display
 Viewing the currently running configuration
copy running-configuration display
 Loading new startup configuration (for example, using FTP):
copy ftp://<ftp_user>:<ftp_password>@<ftp_server_ip>/startup-
configuration.txt flash:startup-configuration.txt
 Downloading SW (for example, using FTP):
copy sw ftp://<ftp_user>:<ftp_password>@<ftp_server_ip>/<sw_file_name>
 Upgrading and accepting SW:
run sw immediately 600
accept sw
 Viewing list of scripts:
show script
 Deleting script:
clear script <script_name>