EasyManua.ls Logo

Siklu EtherHaul - Radius Authentication Mode; Figure 14-2 Network Page: Users Administration - Radius

Siklu EtherHaul
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EtherHaul Operation, Administration and Maintenance Manual
Page 130
14.1.4 Radius Authentication Mode
Figure 14-2 Network Page: Users Administration Radius
Users are defined in the system, including name and type. The passwords are defined in
the server.
This section allows configuring the following parameters:
Authentication Mode Radius.
Shared Secret In Radius or Tacacs mode, Shared Secret should be entered
(identical to the one in the server). Note that is using more than one AAA server,
the servers should have the same Shared Secret.
# - Server index. Up to 5 servers can be configured. The Authentication starts
from the 1st server and goes down to the 5th.
IP Address of the AAA server.
Protocol Port the default port for Radius is 1812.
Accounting Port none, SSH, HTTP, all.
Dummy Authentication is not supported for Radius (Tacacs only).

Table of Contents

Other manuals for Siklu EtherHaul

Related product manuals