EtherHaul Operation, Administration and Maintenance Manual
Page 44
Select a script from the list and click Show to view (pop-up screen) list of commands
composing this script.
Click Run to run the selected script. The commands in the script will be executed
one after the other. Pop-up screen will display the progress and outcome of the
script.
Click Delete to delete the selected script.
Enter a file name and click Load Script to load a new script file.
When clicking Load Script, the system will look for the file at the FTP directory
and will store it in the file system as a new script (under directory scripts/).
6.3.5 Configuration Management
Figure 6-7 System Page: Maintenance – Configuration Management
This section allows configuring the following parameters:
Default Configuration – Click Restore to delete current startup-
configuration.txt file. After reset, the system will come up with the factory
default configuration (unless customer_default_config.txt file is present).
Startup Configuration – Click Show to view (pop-up screen) the startup-
configuration.txt file. The startup-configuration file lists the commands that
build the configuration the system will come up with after reset.
Click Load to load a new startup-configuration file that will replace the current
file and will be used after next system reset.
When clicking Load, the system will look for a file named startup-
configuration.txt at the FTP directory and will store it in the file system (flash:)
as the new startup-configuration file. After next reset, the system will come up
with the new configuration.
Whenever contacting Siklu for support, send the output of this script from both
systems for efficient service (copy the output to a text file).
To Next Page
Loading...
