Siklu EtherHaul - Page 148

EtherHaul Operation, Administration and Maintenance Manual
Page 148
set eth eth1 loopback-mode internal-mac-swap
Line external loopback
set eth eth1 loopback-mode external-mac-swap
RF loopback timeout
set rf loopback internal-mac-swap qam64 4 1 0.5
set eth eth1 loopback-mode external-mac-swap
Use the following command to clear the loopback:
set eth eth1 loopback-mode disable
 Clearing loopback:
Line loopback
set eth eth1 loopback-mode disabled
RF loopback timeout
set rf loopback disabled