Siklu EtherHaul - Page 151

EtherHaul Operation, Administration and Maintenance Manual
Page 151
Radio errors observed in these indicators do not mean necessarily frame-loss on the
Ethernet service.
The ARQ (Automatic Repeat Request) algorithm uses selective repeat (retransmission)
to eliminate radio BER.
The arq-in-loss and arq-out-loss indicate frame-loss over the radio that is
noticed by the Ethernet service. The indication for link's quality and operation without
frame-loss is indicated by no loss on these indicators.
Radio statistics counters – recording 96 intervals of 15 minutes (last 24 hours) of the
following parameters:
Attribute
Description
Incoming Octets (in-octets)
The total number of octets received from the RF link.
Incoming Idle Octets
(in-idle-octets)
The total number of octets received from the RF link
while idle.
Incoming Good Octets
(in-good-octets)
The number of good octets received from the RF link.
Incoming Erroneous Octets (in-
errored-octets)
The number of received erred octets from the RF link.
Outgoing Octets (out-octets)
The total number of octets transmitted to the RF link.
Outgoing Idle Octets
(out-idle-octets)
The total number of octets transmitted to the RF link
while idle.
Incoming Packets (in-pkts)
The total number of packets received from the RF link.
Incoming Good Packets (in-good-
pkts)
The total number of good packets received from the RF
link.
Incoming Erroneous Packets (in-
errored-pkts)
The total number of erred packets received from the RF
link.
Incoming Lost Packets
(in-lost-pkts)
The total number of lost packets received from the RF
link.
Outgoing Packets (out-pkts)
The total number of packets transmitted to the RF link.
Minimum CINR value (min-cinr)
The minimal CINR value recorded in the interval.
Maximum CINR value (max-cinr)
The maximal CINR value recorded in the interval.
Minimum RSSI value (min-rssi)
The minimal RSSI value recorded in the interval.
Maximum RSSI value (max-rssi)
The maximal RSSI value recorded in the interval.
Minimum modulation value (min-
modulation)
The lowest modulation profile recorded in the interval.
Maximum modulation value (max-
modulation)
The highest modulation profile recorded in the interval.